: Product introduction :
7 、8行不同行距的玉米割台和 4.57 米割副的小麦刚性割台和不同割副的大豆挠性割台，采用世界先进的全轴流脱粒分离滚筒技术，一次作业可完成对玉米等农作物的收割、脱粒、清选分离和谷物卸粮运送，通过更换不同的脱粒滚筒、分离装置和收获割台，可以实现对小麦、水稻等农作物进行机械化作业，其有一机多用、性价比高、适应性强、作业效率高、破损率低、总损失率小、收获效果好等优点。 It can be connected with 7 , 8 rows of corn headers with different row spacing, 4.57 meters of wheat rigid headers and soybean flexible headers with different cutting pairs. It adopts the world's most advanced full axial flow threshing and separating drum technology, which can be completed in one operation. For the harvest, threshing, separation and separation of corn and other crops, and grain unloading and transportation, by replacing different threshing drums, separators and harvesting headers, it can realize the mechanized operation of crops such as wheat and rice. It has a multifunctional and cost-effective It has the advantages of high adaptability, high operating efficiency, low breakage rate, small total loss rate, and good harvesting effects.
1. Adopting full axial flow double threshing separation drum technology. The threshing separation drum is composed of two parts: threshing zone and separation zone. The materials are first rubbed and combed in the threshing zone and then rotated and transported to the separation zone for separation. Grade separation, small impact on crops, low crushing rate, high operating efficiency, difficult to block when harvesting wet crops.
2. The cleaning system adopts an adjustable speed straight volute fan, a double-layer fish scale screen and an extended tail screen that can adjust the air volume and angle. The cleaning area is large and the cleaning effect is good.
3. The drum speed adjustment adopts a stepless speed change structure with a wide range of speed adjustment to meet the harvest requirements of various crops.
4. The key working parts are equipped with electronic sensors to monitor the operation of the key components of the harvester in real time, and a rear-view system is installed to provide a strong guarantee for the driver's good driving.
5. The bridge adopts reinforced floating feeding roller to cross the bridge, which can realize fast connection with the header, has good versatility, easy operation and reliable connection.
6. The walking system adopts hydrostatic drive technology, and the power output adopts the transfer case design. The structure is simple and the failure rate is low.
7. The use of open and large-scale grain silos and high-level hydraulic grain unloading cylinders, the height of grain unloading is high, and the rate of grain unloading is fast.
8. The same host can realize the free conversion of the two separation separation technologies of the full axial flow threshing separation drum technology and the shear flow threshing drum and the document separator separation device, which is easy to replace, multi-purpose for one machine, high cost performance and strong adaptability.
8 行玉米收获割台可以实现一键式按钮双向折叠，道路通过性能好。 9, 8 rows of corn harvesting headers can realize one-way push-button two-way folding, and the road passing performance is good.
Engine rated power
Engine rated speed
分钟 Laps / minute
Corn Header Working Lines
Applicable line spacing range
.Small ground clearance
Pull stem roller type
四棱对刀 Plate type five-edge knife
Dimensions (length × width × height)
× 4440 × 3860 （行距520 ） 9600 × 4440 × 3860 (line spacing 520 )
× 4920 × 3860 （行距600 ） 9600 × 4920 × 3860 (line spacing 600 )
× 5220 × 3860 （行距650 ） 9600 × 5220 × 3860 (line spacing 650 )